A high quality U.S. manufacturer of thermocouples and RTD. It is the most common sensor calibration type providing the widest operating temperature range. REOTEMP Instrument Corporation - 10656 Roselle Street - San Diego, CA 92121 - Phone: 858.784.0710 - Fax: 858.784.0720 - Email: The information on thermocoupleinfo.com was provided by REOTEMP Instrument Corporation. The information on thermocoupleinfo.com was provided by REOTEMP Instrument Corporation. Maximum continuous temperature is around 1,100C.
Type K Temperature Range: Thermocouple grade wire, –454 to 2,300F (–270 to 1260C) Extension wire, 32 to 392F (0 to 200C) Type K Accuracy (whichever is greater): Standard: +/- 2.2C or +/- .75%; Special Limits of Error: +/- 1.1C or 0.4%; Type of K Thermocouple. A high quality U.S. manufacturer of thermocouples and RTD. Type K, J, T, E, R, S, etc. Thermocouple Accuracy Table by Type and Temperature Consideration for bare wire type K thermocouple applications: This can become a problem when extreme high temperatures are being read.
This content is not available in your preferred language.The content is shown in another available language. Visit www.reotemp.com for more information about our products and services. Thermocouple Accuracies - Thermocouples Accuracy Comparison Chart. Type K Temperature Range: Thermocouple grade wire, –454 to 2,300F (–270 to 1260C) Extension wire, 32 to 392F (0 to 200C) Type K Accuracy (whichever is greater): Standard: +/- 2.2C or +/- .75% In addition to accuracy based on the type of thermocouple, thermocouples have a specified range of temperatures over which they can operate. Visit www.reotemp.com for more information about our products and services. Thermocouples are available with standard grade tolerances or special grade tolerances called Class 2 and Class 1 respectively.
Your browser may include features that can help translate the text.Collaborate with other users in our discussion forumsA valid service agreement may be required, and support options vary by country. The type K is commonly found in nuclear applications because of its relative radiation hardness.
Due to its reliability and accuracy the Type K thermocouple is used extensively at temperatures up to 2300°F (1260°C).
Reported In shows products that are verified to work for the solution described in this article. Type K thermocouples usually work in most applications as they are nickel based and exhibit good corrosion resistance. Thermocouple accuracy is influenced by several factors including the Thermocouple type, its range of interest, the purity of the material, electrical noise (EMI and RFI), corrosion, junction degradation, and the manufacturing process. Their ranges are determined by numerous variables, including the following: Type (i.e. This solution might also apply to other similar products or applications. J, K, E, T, RX/SX, N, CX) Sheath material