separately, but you will only be charged for one handling fee. All prices include insurance against damage or theft. The correct dosage is located on the label.If the pH is too low, then add pH increaser. It’s also a good idea to make sure that your pool gate latch still works properly. Pools require many tasks that need to be done weekly, sometimes more frequently, and trying to remember all of them is no easy feat. During the pool season, there are semi-weekly, weekly, and monthly pool maintenance tasks required. Swimming Pool Maintenance Checklist Opening Your Pool • Clean, and remove the pool cover for future storage • Vacuum all pool areas • Clean surrounding pool area • Check pool accessories and safety features ladder, gates, diving board, plugs, drain, filter system, skimmers, diving boards • Adjust water level to recommended height of 1” (25mm) per hour The optimal salinity level for pools is 3200ppm.Scaling, or water deposits, can appear on the pool walls and equipment when too much calcium is present in the water. However, it is recommended that pool water be maintained at 1,200 ppm.In addition to the weekly removal of filter debris, you should also chemically clean it monthly.If you have a vinyl pool liner, check for holes and tears.
If the level is too high, then adjust it down using pH decreaser.
Swimming pools should have a maximum of about 1,500 ppm TDS. Thorough pool care will ensure clean and safe water throughout the swimming season. Check to make sure that seals on the pool’s motor and pump are properly secured.There are multiple details to consider when ensuring that your pool is properly maintained. The information stated within this document is for reference only, and is not intended to be used as a basis for exact … Routine swimming pool maintenance is the work performed by the aquatics staff as an ongoing responsibility. Here’s a checklist of the important details you should look for when maintaining your pool throughout the season. Not sure about your water chemistry? TA levels should remain between 80-150ppm. You should do a weekly check making sure your facility’s pool remains at the proper water level. Whether you have an in-ground pool or above-ground pool, 2500 gallons or 25,000, maintaining a weekly pool routine will help … If the pH has dropped possibly so has your total alkalinity.Check filter pressure and backwash only if requiredCheck water level and adjust as necessary at the prescribed rate of 1” (25mm) per hourShock the pool as per label instructions.
A shock treatment restores clarity to pool water.
Note the alkalinity and cyanuric acid, as well as any other actions taken during the weekly maintenance of the swimming pool. This treatment restores the sparkle to the pool water and destroys germs and organic contaminants (can be done once every 2 weeks) The foundation of effective pool care is built on three simple but important concepts: circulation, cleaning, and chemistry. Items ordered together may be shipped You can also contact your weekly-pool-maintenance Author: The Pool Factory Subject: This checklist contains a few items that if purchased will drastically reduce your amount of time maintaining your above ground pool. Proper maintenance and upkeep of your pool is necessary to keep it clean and safe throughout the summer. Keywords: The Pool Factory Created Date: 7/28/2014 10:05:26 PM Salt Levels (for saltwater pools): Salt levels should remain between 2700-3400ppm. You just need to properly clean the chlorinating cell. This starts off with unlocking the pool facility and ends with closing up at the end of the day. It is important that you follow your manufacturer’s guidelines for how to properly maintain your filter. We offer a Remove any large accumulation of debris on the bottom with a leaf scoop.Feed the pool with chlorine or other sanitizer to satisfy its requirements either manually or automatically.Check that the water level is high enough for the pump to operate correctly.Test and adjust sanitizer level (may require more frequent testing depending upon bather load and environmental conditions)Visually inspect pool water for clarity, color and visible contaminantsTest and adjust pH (may require more frequent testing depending upon bather load and environmental conditions)The pH should be in the range 7.4 – 7.7 if the pool has a vinyl or tile finish. The key to having a clean and safe pool is developing a routine maintenance plan. 0.
If you decide to perform your own weekly pool maintenance, we highly recommend creating and following a checklist so you don’t forget any important steps. Make any necessary repairs to the liner as soon as possible.Inspect ladders, handrails, diving boards, and other pool equipment to make sure that bolts are tight.
When there is too little calcium, surface pitting is possible. It has been proven to perform extremely well in three main areas; it eliminates algae growth and reduces your use of chlorine, clarifies the water while maintaining a proper pH level, and can reduce your electrical operating costs by as much as 66%.Note filter pressure and backwash if necessary.
A task that should be done daily, skimming is the first step of your weekly maintenance routine. There are three main types of pool filters: . The second screw from the top of the skimmer is a good marker to see if you need to add or drain any water.If pool water is cloudy or a tint of green, add 1 pound of shock per 5,000 gallons (according to manufacturers label instructions).Focus Multi Purpose Shock is a highly effective sanitizer that kills harmful bacteria, aids in algae control and helps keep your above ground pool clean and clear.In addition to this weekly checklist, also complete our suggested America’s Above Ground Pool Experts – is the best place to find everything you need to make owning a swimming pool or spa fun and easy, at the best prices today. Again see labels for dosage.